Enerpac® EP3504TE-M

Enerpac® EP3504TE-M E-Pulse Torque Wrench Electric Hydraulic Pump, 0.85 hp, 2 Stages, 0.8 gal Reservoir, 32 cu-in/min Flow Rate, 10000 psi Pressure

  • TIEPN: ENP EP3504TE-M
  • MPN: EP3504TE-M
  • Min. Order Qty: 1
  • Quantity Interval: 1
  • loading

The Enerpac® E-Pulse torque wrench pump, through its innovative design, is ideal for high volume fastening applications where weight is a critical factor. Smart controls enable the motor to maintain constant power providing higher flow than "traditional" 0.37 kW pumps. The durable aluminum housing, integrated heat exchanger and highly efficient permanent magnet motor minimize heat buildup in the toughest environments. The interactive pendant provides the operator a number of usage options for optimal efficiency. The E-Pulse torque wrench pump is the pinnacle of bolting equipment.

Enerpac® Electric Hydraulic Pump, Torque Wrench, Series: E-Pulse, 2 Stage, 0.8 gal Reservoir, 0.85 hp, 32 cu-in/min, 10000 psi, 200 to 250 VAC, 7 A, 50/60 Hz, 600 to 2400 rpm, 16.9 in Overall Length, 10.2 in Overall Width, 14.2 in Overall Height

Amperage Rating      :      7 A
Frequency Rating      :      50/60 Hz
Overall Height      :      14.2 in
Overall Length      :      16.9 in
Overall Width      :      10.2 in
Series      :      E-Pulse
Speed      :      600 to 2400 rpm
Type      :      Torque Wrench
Voltage Rating      :      200 to 250 VAC
Horsepower      :      0.85 hp
Number of Stages      :      2
Reservoir Capacity      :      0.8 gal
Flow Rate      :      32 cu-in/min
Pressure Rating      :      10000 psi
  • Smart controls enable motor to maintain constant power across the pressure range
  • 24 VDC power regulator minimizes effects of poor power supply
  • 6-piston block design provides even flow for smooth operation of tool
  • High efficiency permanent magnet, direct drive motor enables continuous use and long service life
  • Built in thermal protection
  • System components enclosed for protection
  • IP rating - 54 on the pump, 67 on the pendant
  • Integrated heat exchanger minimizes heat buildup
  • Pendant and cord management system
  • Draining oil not required for pump element maintenance
  • Convenient oil fill port, oil level indicator and automatic breather
  • User can set pressure and operate in manual or auto cycle mode
  • Intelligent auto cycle enables press and release actuation to cycle wrench until final torque is achieved