Saw It® pneumatic saw provides power and reciprocating motion to blades. Used with power hack saw blades (sold separately), this saw cuts plastic, steel, stainless steel, and C900/c905 PVC pipe. Sawitsd2 model improvements include more powerful air motor, up to 20% faster cutting performance and adjustable exhaust flow air direction. Saw It® turns and works freely, along with starting easy and running smoothly. As a safety feature, a trigger lock prevents accidental in on in if the trigger is bumped or pressed unintentionally. Saw It® needs 6 in clearance beyond the pipe to accommodate blade movement. The saw It® must have a means to hold it in place and the recommended saw it® vise (sold separately) provides stability and safety for the cut. Optional blade guides provide directional guidance for the saw. Maximum capacity is blade and blade guide dependent. Saw It® cuts up to 24 in diameter pipe when used with the saw It® vise and a 12 in chain extension. Saw It® cuts up to 20 in (500 mm) diameter pipe when used with recommended sawitbg30 blade guide. Pneumatic saws are less likely to ignite materials than gas-powered saws and even some electrical-powered saws. However, the saw It® is not recommended for gas lines. Saw It® vise 04600 fits 4 to 12 in diameter pipe. When one chain extension, 6 or 12 in, is added, the vise capacity increases to 18 or 24 in respectively. Note: always use a filter-regulator-lubricator (frl) with reed pneumatic tools like the saw It®. Reed offers frl #97591 for user convenience. 14 Tpi work on materials at least 1/8 in thick. 8 Tpi work on materials at least 3/16 in thick. Use fewer teeth per inch on softer materials like plastic.

Reed Saw It® Pneumatic Saw, Bare Tool Tool/Kit, 2 hp, 40 cfm, 90 psi Air

• Saw It® SAWITSD2 cuts plastic, steel and other metal pipe using pneumatic power
• More powerful air motor (old motor 1-1/2 hp, new 2 hp)
• Better cutting performance (up to 20% faster cut)
• Adjustable airflow direction for exhaust
• Blades sold separately use Reed power hack saw blades
• Saw It® pneumatic saw is a good choice for cutting plastic and steel pipe and a great cutting tool for hard-to-reach places
• Immediate shut down when you let go of the throttle
• Immediate start-up when you squeeze the throttle
• Saw It® vise and Saw It® blade guides should be added for extra stability
• Capacity is dependent on blade and chain extensions

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Reed_07620_Catalog.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Reed_07620_Catalog.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Reed_07620_Manual.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Reed_07620_Manual.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Reed_07620_Line_Drawing.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Reed_07620_Line_Drawing.pdf