JET® Drill Press, Arboga Gear Head, MT-3 Spindle Taper, 5-1/8 in Spindle Travel, 130/260/420/840 rpm Low/535/1070/1745/3480 rpm High Spindle Speed, 35-5/8 in Spindle to Table Distance, 10 in Spindle to Column Distance, 15-3/4 x 19-3/4 in Table, 24 x 22 in Base, 3-15/16 in Column Dia, 3/4 to 1 hp, 120 VAC, 24 x 22 x 72 in
| Base Dimensions |
: |
24 x 22 in |
| Column Diameter |
: |
3-15/16 in |
| Dimensions |
: |
24 x 22 x 72 in |
| Spindle Speed |
: |
130/260/420/840 rpm Low/535/1070/1745/3480 rpm High |
| Spindle Taper |
: |
MT-3 |
| Spindle Travel |
: |
5-1/8 in |
| Spindle to Column Distance |
: |
10 in |
| Spindle to Table Distance |
: |
35-5/8 in |
| Type |
: |
Arboga Gear Head |
| Horsepower |
: |
3/4 to 1 hp |
| Voltage Rating |
: |
120 VAC |
| Table Size |
: |
15-3/4 x 19-3/4 in |
- Eight drilling speeds provide high torque at lower speeds for both small and medium hole drilling
- Fiber and steel gears, which do not require an oil bath, allow for easier speed changes
- Adjustable taper bearings mounted in the end of the quill
- Head and table rotates 360 deg around column
- Drill head and table can be raised and lowered
- Safety latch to prevent head dropping when unclamped
- Helical gears for smooth, quiet operation
- Quick release drill ejector
- English/metric depth gauge
- T-Slotted table with coolant trough
- Machined, T-slotted base plate
- 3-15/16 in steel column
- Extra long quill movement
- Fully enclosed spindle
- Large T-slotted table
- Telescoping safety spindle guard
- 2-3/8 in quill diameter
- 44 in spindle distance to base
- 350 lb work table weight capacity
- 20 in drills to center of circle, 24-1/2 in table travel, 1-3/8 in drilling capacity cast iron, manual quill feed, 1-1/4 in drilling capacity mild steel, 220 V 1 Phase prewired
Send
Print
