Starrett® Surface Gage, Full Sized, Series: 57 Series, Cast Iron Base, Black Wrinkle

• Full size surface gage with attractive finish
• Base is ground flat with two frictionally held gage pins in the steel base which can be pushed down and used against the edge of a surface plate or T-slot for linear work
• Designed for a wide variety of uses
• The new style snug at the top of the spindle comes standard with these tools
• Ground bases for accurate reference surfaces
• V-Groove in the base for cylindrical work
• V-Groove on the front end which allows the spindle to adjust to any angle above or below the base
• A very positive fine adjustment through a rocker arm that makes for smooth and accurate settings
• Grooves on the side of the base for a sure and easy grip
• Nicely tapered scribers, so that you can see what you are doing

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Starrett_56C_Full_Engineering_Drawing.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Starrett_56C_Full_Engineering_Drawing.pdf