Reed's Feed Tap™ drills through PVC, PE, cast iron and ductile iron while under pressure. The compact design, featuring a separate feed for advancing the heavy-duty shell cutter into the pipe, allows the user to easily complete the tap using an electric or cordless drill, right angle drill for cast and ductile iron, or even a 7/16 in wrench (drill/wrench not included) with manual power for plastics. The independent feed control advances the shell cutter for tapping PVC pipe as recommended by Uni-Bell PVC Pipe Association. The FTB Feed Tap consists of the base unit which allows the user to purchase shell cutters and corporation adapters separately, as needed. A complete kit is sold as FT2000UNIV. The kit contains both a coupon retaining drill bit, CRPD25 and two sets of coupon retaining magnets. Plastic Pipe only FTP2000UNIV is used for manual drilling operations with Reed's proven PVC/PE Shell Cutters. The FTP2000UNIV comes complete with all corporation adapters, shell cutters, adapters and a ratchet wrench with socket to cover 3/4 to 2 in services in PVC and PE. Each machine ships with a sturdy carrying case.

Reed Feed Tap™ Feed Tap Basic Kit

• Basic feed tap kit
• Operator purchases shell cutters and adapters separately
• Contains both a coupon retaining drill bit, CRPD25 and two sets of coupon retaining magnets, he magnets work well on ductile iron taps and the CRPD25 bit works on all types of pipe taps, the retaining method used is up to the individual operator
• Note: Feed Tap™ is designed to be used with corporation stops and bronze gate valves up to 2 in
• Feed Tap™ not to be used on gas lines

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Reed_09160_SDS.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Reed_09160_SDS.pdf