Precision Twist Drill Core Drill, Long Length, Series: T400, 1-3/16 in Drill - Fraction, 1.1875 in Drill - Decimal Inch, 13 in Overall Length, 7-3/8 in Cutting Depth, 4 Flutes, Spiral Flute, 7-3/8 in Flute Length, 1-3/16 in Shank, #4 Morse Taper Shank, 118 deg Point, Chamfer Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Steam Oxide, Applicable Materials: Magnetic Soft Steel, Structural Steel/Case Carburizing Steel, Plain Carbon Steel, Alloy Steel, Lamellar Graphite, Alloy Steel/Hardened and Tempered Steel, Free Machining Stainless Steel, Austenitic, Ferritic + Austenitic and Martensitic

• Core drill with taper shank for enlarging pre-drilled or cast holes in a wide range of materials
• High speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance
• Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge
• Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high torque applications such as large cut diameters
• When run in a counterclockwise direction (right hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Precision_Twist_Drill_024604_Catalog.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Precision_Twist_Drill_024604_Catalog.pdf