3M™ tape primer 94 can be used to improve the overall adhesion of tape, film and vinyl graphics to Polyethylene, Polypropylene, ABS, PET/PBT Blend, Concrete, Wood, Glass, Metal and Painted Metal Surfaces. Make sure your surface is clean and dry before applying a thin, uniform coat of 3M™ tape primer 94. The primed surface must remain free from contaminants prior to applying the tape. It's important to use the minimum amount of product necessary as over applying can cause sub-optimal results. Allow the primer to dry completely, which is usually accomplished in 5 min at room temperature, before applying tape. Special note: porous surfaces may require 2 applications for uniform coverage and good adhesion. Allow your first application of primer to dry before applying a second coat. 3M™ tape primer 94 may be applied with a brush, swab, pressurized flow gun, knurled roller or similar type of equipment and can be removed with isopropyl alcohol. Vigorous scrubbing may be required.

3M™, 7100003278, Tape Primer, Pail Container, 0.5 pt Container, 5 min Drying, Clear Light Yellow, 0.82 Specific Gravity, 781 g/L VOC, 1 to 35 cPs Viscosity, Applicable Materials: Polyethylene, Polypropylene, ABS, PET/PBT Blend, Concrete, Wood, Glass, Metal and Painted Metal Surfaces

• Commonly used for increasing adhesion of film and vinyl graphics in automotive detailing
• Can be applied with brush or swab for small areas and a pressurized flow gun for larger areas
• Dries to a clear finish
• Cleans up with isopropyl alcohol

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/3M_021200_23926_SDS.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/3M_021200_23926_SDS.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/3M_021200_23929_Specification_Sheet.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/3M_021200_23929_Specification_Sheet.pdf
• VIDEO LINK https://www.youtube.com/watch?v=aYC-ECqzn78