Dynabrade® Wet Rotary Sander, Basic, Tool/Kit: Bare Tool, 5 to 8 in Pad, 0 to 2000 rpm, 0.7 hp, 43 scfm, 90 psi Air, 1/4 in NPT Air Inlet, Rear Load Exhaust Location, 3/8 in Minimum Hose Size, Right Angle, 82 dB, 13 in L x 3-1/8 in H

• Basic Model runs 5 in (127 mm), 6 in (152 mm) or 8 in (203 mm) diameter polishing pads
• Pads sold separately
• Without pre-assembled hook-ups for those not requiring through-the-tool water feed (for those who prefer to use a hose or spray bottle)
• Accepts variety of abrasive products including wet or dry discs, non-woven-nylon surface conditioning discs and film backed discs
• Water is fed through the center of pad directly to the work surface, providing optimum flushing of work surface and pad
• This prevents build-up of sanding residue on the disc, allowing the tool to be used efficiently in any position
• Independent water rinse allows flushing of the work surface without starting the tool
• Rear exhaust muffler reduces noise levels
• Conventional rotary action with lubricated gears
• High torque air motor has variable speed
• Safety-lock throttle and soft-grip handle (adjusts to left or right hand)
• Center water feed prevents build up of sanding residue on the disc
• 5/8-11 spindle thread
• Accepts variety of abrasive products including wet or dry discs, Scotch-Brite® surface conditioning discs and film-backed disc