JET® Bench Lathe, Series: GHB-1340A, 13 in Swing Over Bed, 7-25/32 in Swing Over Cross Slide, 43 in Distance Between Centers, 7-3/8 in Bed Width, #3 Morse Taper Tailstock Taper, #5 Morse Taper (#3 Morse Taper) Spindle, 70 to 2000 rpm Spindle Speed, 8 Spindle Speed, 6-5/16 in Cross Travel, 3-3/4 in Tailstock Spindle Travel, 35 in Carriage Travel, 2-11/16 in Compound Travel, 0.0006 to 0.013 in Maximum Cross Feed Rate per Revolution, 0.0018 to 0.0374 in Maximum Longitudinal Feed Rate per Revolution, 2 hp, 230 VAC, 79 x 28-1/2 x 30 in

• Comes with an enclosed gear box
• Enclosed gear box design provides smooth, quiet operation
• Fast, easy speed changes
• Hardened and ground gears are featured in the headstock and gearbox
• D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
• Headstock is constantly oiled during operation
• Gear box gives wide inch threading and feed capabilities with no gear changes
• V-way bed design is induction hardened and ground
• Gap bed section provided for large diameter work
• Independent leadscrew and feed rod
• T-slotted compound slide featuring four-way tool post
• Carriage mounted spindle control lever
• Automatic feeding and threading are fully interlocked
• Feed selectors travel in grooved ways
• Tailstock may be offset for turning tapers and includes an inch metric graduated quill
• 6 in 3-jaw direct mount scroll chuck with top reversing jaws, 8 in 4-jaw independent chuck and 12 in faceplate
• Four-way tool post, steady and follow rest, metric change gear, centers and headstock center sleeves and threading dial
• 40 longitudinal/cross feed rates
• 23 metric threads
• 5/8 in x 5/8 in max tool size, 18-3/4 in swing through gap, 13 in swing over bed, 0.45 - 10 metric threads, 2-3/4 in steady rest capacity, 38 number of inch threads, D1-4 spindle mount, 2-3/8 in follow rest capacity, 1-3/8 in spindle bore, 3-1/2 - 80 TPI, 13 in x 40 in size, 8 in length, 230 V prewired