PE Scraper prepares the outside diameter of PE pipe for electrofusion by removing the oxidized layer and contaminates. Spring-loaded blade keeps consistent pressure on the pipe for a smooth finished surface. This blade tension means the blade does not skip. PE Scraper can be used on the edge of the pipe or anywhere along the pipe with sufficient clearance for turning the tool around the pipe.

Reed PE Pipe Peeler, 1-1/2 to 6 in Capacity

• One tool covers a range of PE pipe from 1-1/2 to 6 in nominal IPS
• Creates a uniformly peeled surface
• Works well even on out-of-round pipe
• Requires 5-1/2 in turning clearance around pipe
• Creates a uniformly scraped surface
• OD must be 1.9 in or more

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Reed_04631_Manual.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Reed_04631_Manual.pdf
• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Reed_04631_Specification_Sheet.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Reed_04631_Specification_Sheet.pdf