SGS® Spade Drill, Single End, Series: 104, Imperial, 5/16 in Drill - Fraction, 0.3125 in Drill - Decimal Inch, 2-1/2 in Overall Length, 7/8 in Cutting Depth, Straight Flute, 7/8 in Flute Length, 5/16 in Shank, 118 deg Point, Flat Point, Right Hand Cutting Direction, Micrograin Solid Carbide Cutting Edge, Applicable Materials: Aluminum, Wood and Plastic, Micrograin Solid Carbide, Bright
| Cutting Direction |
: |
Right Hand |
| Cutting Edge Material |
: |
Micrograin Solid Carbide |
| Drill Diameter Measurement System |
: |
Imperial |
| Finish |
: |
Bright |
| Flute Length |
: |
7/8 in |
| Flute Type |
: |
Straight |
| Overall Length |
: |
2-1/2 in |
| Point Angle |
: |
118 deg |
| Point Type |
: |
Flat |
| Series |
: |
104 |
| Shank Size |
: |
5/16 in |
| Type |
: |
Single End |
| Drill Size - Fraction |
: |
5/16 in |
| Drill Size - Decimal Inch |
: |
0.3125 in |
| Cutting Depth |
: |
7/8 in |
| Material |
: |
Micrograin Solid Carbide |
| Applicable Materials |
: |
Aluminum, Wood and Plastic |
- Solid carbide provides better rigidity than high speed steel
- It is extremely heat resistant
- Bright provides a smooth, polished finish on the tool
- It increases chip flow in softer materials such as aluminum, wood and plastic
- Spiral flutes are constructed of a higher flute angle to remove chips easier
Send
Print
