Dormer Taper Shank Drill Bit, General Purpose Jobber Length, Series: A130, Metric/Imperial, 2.5 mm Drill - Metric, 0.0984 in Drill - Decimal Inch, 111 mm Overall Length, 4XD Cutting Depth, 2 Flutes, Spiral Flute, 30 mm Flute Length, #1 Morse Taper Shank Taper Designation, 118 deg Point, Thinned Web Point, Right Hand Cutting Direction, HSS Cutting Edge, No Through Coolant, HSS, Steam Oxide, Applicable Materials: Steel, Stainless Steel, Cast Iron, Titanium, Nickel, Copper, Aluminum Magnesium, Synthetic Materials, Hard Materials and Graphite
| Applicable Materials |
: |
Steel, Stainless Steel, Cast Iron, Titanium, Nickel, Copper, Aluminum Magnesium, Synthetic Materials, Hard Materials and Graphite |
| Cutting Depth |
: |
4XD |
| Cutting Direction |
: |
Right Hand |
| Cutting Edge Material |
: |
HSS |
| Drill Diameter Measurement System |
: |
Metric/Imperial |
| Finish |
: |
Steam Oxide |
| Flute Length |
: |
30 mm |
| Flute Type |
: |
Spiral |
| Number of Flutes |
: |
2 |
| Overall Length |
: |
111 mm |
| Point Angle |
: |
118 deg |
| Point Type |
: |
Thinned Web |
| Series |
: |
A130 |
| Type |
: |
General Purpose Jobber Length |
| Drill Size - Metric |
: |
2.5 mm |
| Drill Size - Decimal Inch |
: |
0.0984 in |
| Shank Taper Designation |
: |
#1 Morse Taper |
| Material |
: |
HSS |
| Through Coolant (Yes/No) |
: |
No |
- The A130 morse taper drill is especially suited for machine use and especially for column drilling machines
- Accurately ground from high quality high speed steel makes this a robust all rounder
- This specimen is steam relieving, which results in better retention of the cutting oil
Send
Print
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dormer_0022108_Catalog.pdf
