SGS® Jobber Length Drill Bit, General Purpose, Series: 101, Imperial, #70 Drill - Wire, 0.028 in Drill - Decimal Inch, 1-1/4 in Overall Length, 5XD Cutting Depth, 2 Flutes, Spiral Flute, 1/2 in Flute Length, 0.028 in Shank, Straight Shank, 118 deg Point, 4-Facet Point, Right Hand Cutting Direction, Micro Grain Solid Carbide Cutting Edge, No Through Coolant, Micro Grain Solid Carbide, Uncoated, Applicable Materials: Cast Iron, Composites, Hardened Steel, High Temperature Alloy, Non-Ferrous Metals, Plastic, Stainless Steel, Steel and Titanium
| Applicable Materials |
: |
Cast Iron, Composites, Hardened Steel, High Temperature Alloy, Non-Ferrous Metals, Plastic, Stainless Steel, Steel and Titanium |
| Cutting Depth |
: |
5XD |
| Cutting Direction |
: |
Right Hand |
| Cutting Edge Material |
: |
Micro Grain Solid Carbide |
| Drill Diameter Measurement System |
: |
Imperial |
| Flute Length |
: |
1/2 in |
| Flute Type |
: |
Spiral |
| Number of Flutes |
: |
2 |
| Overall Length |
: |
1-1/4 in |
| Point Type |
: |
4-Facet |
| Series |
: |
101 |
| Shank Size |
: |
0.028 in |
| Shank Type |
: |
Straight |
| Type |
: |
General Purpose |
| Drill Size - Wire |
: |
#70 |
| Drill Size - Decimal Inch |
: |
0.028 in |
| Point Angle |
: |
118 deg |
| Material |
: |
Micro Grain Solid Carbide |
| Finish |
: |
Uncoated |
| Through Coolant (Yes/No) |
: |
No |
Send
Print
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/SGS_51067_Catalog.pdf
