Starrett® Surface Gage, Small, Series: 56 Series, Hardened Steel Base

• Weighs only ten ounces (.28kg.) and takes up very little space in a toolbox
• Only 1-3/8 in (35mm) high, including the lower sleeve in the rocker arm
• Scriber has a 3/32 in (2.4mm) diameter and is 3-1/4 in (82mm) long
• Smaller base and spindle than other surface gages and is designed for lighter work
• Two frictionally held gage pins in the steel base which can be pushed down and used against the edge of a surface plate or T-slot for linear work
• Ground bases for accurate reference surfaces
• V-Groove in the base for cylindrical work
• V-Groove on the front end which allows the spindle to adjust to any angle above or below the base
• A very positive fine adjustment through a rocker arm that makes for smooth and accurate settings
• Grooves on the side of the base for a sure and easy grip
• Nicely tapered scribers, so that you can see what you are doing

• https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Starrett_56C_Full_Engineering_Drawing.pdf https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Starrett_56C_Full_Engineering_Drawing.pdf