Dynabrade® Cut-Off Wheel Tool, Central Vacuum Straight Line, Tool/Kit: Bare Tool, 3 in Wheel Dia, 20000 rpm, 37 scfm, 90 psi Air, 1/4 in NPT Air Inlet, Rear Load Exhaust Location, 79 dB, 10-5/16 in L x 5-1/4 in H

• Our air powered, 3 in Dia, straight-line, flush cut-off wheel tool is ideal for central vacuum systems
• Accepts optional 3 in (76 mm) Dia diamond cut-off wheels with 3/8 in (10 mm) Dia mandrel
• The unique shroud and flange design adds versatility
• This too has plenty of power, 0.7 hp, 20000 rpm, rear exhaust
• Non marring plastic flange protects work surface while cutting
• Adjustable cutting height, from flush to 5/8 in (16 mm) above work surface is achieved by inserting wheel mandrel deeper into collet
• Operating tool in horizontal position allows flush-cut trimming of edges
• An essential tool for boat builders, pool, spa and shower manufacturers and in composite industries
• Extended rear exhaust muffler for reduced sound levels
• Ideal for both vertical and horizontal operation
• A 3 in (76 mm) dia diamond wheel with integrated mandrel is required (sold separately)
• Tool has 1 in (25 mm) Dia vacuum port for central vacuum systems
• Speed of tool must not exceed maximum operating speed of accessory
• Never mount bonded grinding wheels
• Always wear eye, face and body protection
• Unique cutaway shroud design allows 1 in (25 mm) wheel depth exposure
• Non-marring plastic flange protects work surface while cutting
• Includes 94300 composite Dynaswivel®, enhancing operator comfort and control
• Safety-lock lever ideal for both vertical and horizontal operation
• 0.7 hp motor speed