RIDGID® 66517
send Send print Print

RIDGID® 66517

RIDGID® 66517 K-60SP-SE Sectional Drain Cleaning Machine, 1-1/4 to 4 in Drain Line, 1/2 hp, 220 VAC

  • TIEPN: RID 66517
  • MPN: 66517
  • UPC: 095691665171
  • Min. Order Qty: 1
  • Quantity Interval: 1
  • loading

The RIDGID® K-60SP is a portable Drain Cleaning Machine designed to clean 11/4 in to 4 in drain lines. Applications include laundry tubs, floor drains, roof vents and stack lines. Rear handle allows for transporting up ladders and cleaning roof-top vent stacks. The machine is driven by a 1/2 HP motor that has a grounded electrical system. An integral Ground Fault Interrupter (GFCI) is built into the line cord. A toggle switch provides FOR/OFF/REVERSE control of the motor. The K-60SP is designed to use sectional-type cable that has a quick change coupling system for disconnecting tools. The cable is manually fed in and out of the drain and rotates at a speed of 600 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released. An adjustment knob allows the K-60SP to use both 5/8 in and 7/8 in sectional cable.

RIDGID® Sectional Drain Cleaning Machine, 1-1/4 to 4 in Drain, 1/2 hp, 220 VAC, 7 A, 600 rpm, 18 in L x 9-1/2 in W x 14 in H

Amperage Rating      :      7 A
Dimensions      :      18 in L x 9-1/2 in W x 14 in H
Speed      :      600 rpm
Tool/Kit      :      Kit
Drain Line Capacity      :      1-1/4 to 4 in
Horsepower      :      1/2 hp
Voltage Rating      :      220 VAC
  • A compact machine for institutional, commercial or residential cleaning, also ideal for septic tank vacuum truck operators, small enough to fit into cramped spaces, yet powerful enough to clear tough blockages
  • Ideal for rooftop vent stacks, rear handle allows for easy transporting up ladders and onto rooftops
  • Remove only two bolts to access jaw set for cleaning or replacement, removal of same bolts provides access to belt drive
  • Equipped with 1/2 hp motor approved to CSA and UL standards (NRTLC)
  • Simple adjustment knob allows unit to spin both 7/8 and 5/8 in dia cable, adjusts in seconds
  • 7/8 in cable (C-10) cleans 2 to 4 in lines through 150 ft
  • 5/8 in cable (C-7, C-8, C-9) cleans 1-1/4 to 4 in lines through 125 ft