JET® Milling Machine, Vertical, 10 in L x 50 in W Table, 35 in Longitudinal Travel, 15-1/4 in Cross Travel, 14-1/4 in Knee Travel, 20-1/2 in Ram Travel, 10 to 3600 rpm Spindle Speed, Variable Speed Pulley Speed Control, 5 in Spindle Travel, R-8 Spindle Taper, 3-3/8 in Quill Dia, 19 in Spindle to Table Distance, 5-1/2 to 26 in Distance Between Centers, 720 lb Table Load, 3 T-Slots, 5/8 in T-Slot, 90 deg Right/Left, 45 deg Backward/Forward Tilting Angle, 3 hp, 460 VAC, 96 in L x 71 in W x 88 in H
| Cross Travel |
: |
15-1/4 in |
| Dimensions |
: |
96 in L x 71 in W x 88 in H |
| Knee Travel |
: |
14-1/4 in |
| Number of T-Slots |
: |
3 |
| Quill Diameter |
: |
3-3/8 in |
| Ram Travel |
: |
20-1/2 in |
| Spindle Speed |
: |
10 to 3600 rpm |
| Spindle Travel |
: |
5 in |
| Spindle to Table Distance |
: |
19 in |
| T-Slot Size |
: |
5/8 in |
| Table Load Capacity |
: |
720 lb |
| Tilting Angle |
: |
90 deg Right/Left, 45 deg Backward/Forward |
| Type |
: |
Vertical |
| Horsepower |
: |
3 hp |
| Voltage Rating |
: |
460 VAC |
| Table Size |
: |
10 in L x 50 in W |
| Longitudinal Travel |
: |
35 in |
| Distance Between Centers |
: |
5-1/2 to 26 in |
| Speed Control |
: |
Variable Speed Pulley |
| Spindle Taper |
: |
R-8 |
- Runs quieter and smoother than conventional variable speed head
- Low maintenance head has less moving parts
- No belt slippage allows more power at spindle
- Meehanite casting
- Hardened and ground table
- Chrome lead screws on X and Y axis
- Turcite B on X and Y axis
- Large diameter quill is chromed
- High precision Class 7 spindle bearing
- No fuse breaker power connections
Send
Print
