Dormer Reduced Parallel Shank Drill, General Purpose Jobber Length Type N, Series: A170, 1-11/64 in Drill - Fraction, 1.1719 in Drill - Decimal Inch, 6 in Overall Length, 4XD Cutting Depth, 2 Flutes, Standard Spiral Flute, 3 in Flute Length, 1/2 in Shank, Reduced Shank, 118 deg Point, Conventional Point, Right Hand Cutting Direction, HSS Cutting Edge, HSS, Steam/Black Oxide, Applicable Materials: Magnetic Soft Steel, Alloy Steel, Lamellar Graphite, Aluminum, Magnesium, Unalloyed and Copper
| Applicable Materials |
: |
Magnetic Soft Steel, Alloy Steel, Lamellar Graphite, Aluminum, Magnesium, Unalloyed and Copper |
| Cutting Depth |
: |
4XD |
| Cutting Direction |
: |
Right Hand |
| Cutting Edge Material |
: |
HSS |
| Finish |
: |
Steam/Black Oxide |
| Flute Length |
: |
3 in |
| Flute Type |
: |
Standard Spiral |
| Number of Flutes |
: |
2 |
| Overall Length |
: |
6 in |
| Point Angle |
: |
118 deg |
| Point Type |
: |
Conventional |
| Series |
: |
A170 |
| Shank Type |
: |
Reduced |
| Type |
: |
General Purpose Jobber Length Type N |
| Drill Size - Fraction |
: |
1-11/64 in |
| Drill Size - Decimal Inch |
: |
1.1719 in |
| Shank Size |
: |
1/2 in |
| Material |
: |
HSS |
- High speed steel (HSS) provides good wear resistance and can be used in general purpose applications on both ferrous and non-ferrous materials
- Oxide coating prevents chip building, galling and welding on the workpiece
- It is commonly used on low carbon metals, stainless steel and ferrous metals
- Straight shanks are used for general purpose applicationsthey are used with portable drills and drill presses on ferrous and non-ferrous materials
- Regular helix form
- Shank is smaller than the drill bit diameter they are used with portable drills and drill presses
Send
Print
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Dormer_0121863_Catalog.pdf
