JET® Engine Lathe, Geared Head, Series: GH-1440W-1, 14 in Swing Over Bed, 8-1/2 in Swing Over Cross Slide, 40 in Distance Between Centers, 10-1/2 in Bed Width, #3 Morse Taper Tailstock Taper, #5 Morse Taper (#3 Morse Taper) Spindle, 40 to 1800 rpm Spindle Speed, 12 Spindle Speed, 6-3/8 in Cross Travel, 4-3/4 in Tailstock Spindle Travel, 37-1/2 in Carriage Travel, 3-1/2 in Compound Travel, 0.0003 to 0.0103 in Maximum Cross Feed Rate per Revolution, 0.0012 to 0.0294 in Maximum Longitudinal Feed Rate per Revolution, 3 hp, 230 VAC, 78 x 38 x 59 in
| Bed Width |
: |
10-1/2 in |
| Carriage Travel |
: |
37-1/2 in |
| Compound Travel |
: |
3-1/2 in |
| Cross Travel |
: |
6-3/8 in |
| Dimensions |
: |
78 x 38 x 59 in |
| Maximum Cross Feed Rate per Revolution |
: |
0.0003 to 0.0103 in |
| Maximum Longitudinal Feed Rate per Revolution |
: |
0.0012 to 0.0294 in |
| Number of Spindle Speeds |
: |
12 |
| Series |
: |
GH-1440W-1 |
| Spindle Speed |
: |
40 to 1800 rpm |
| Tailstock Spindle Travel |
: |
4-3/4 in |
| Tailstock Taper Size |
: |
#3 Morse Taper |
| Type |
: |
Geared Head |
| Voltage Rating |
: |
230 VAC |
| Swing Over Bed |
: |
14 in |
| Swing Over Cross Slide |
: |
8-1/2 in |
| Distance Between Centers |
: |
40 in |
| Spindle Size |
: |
#5 Morse Taper (#3 Morse Taper) |
| Horsepower |
: |
3 hp |
- 1-1/2 in bore spindle supported by precision tapered bearings
- Hardened and ground gears are featured in the headstock and gearbox
- D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
- Headstock is constantly oiled during operation
- Splined, not keyed, shafts are utilized in the headstock
- Gearbox provides larger threading and feed capabilities with no gear changes
- V-way bed design is induction hardened and ground
- Gap bed section provided for large diameter work
- Independent leadscrew and feed rod
- Spindle actuation control is apron mounted
- Features precision bearings to support the hardened and ground spindle
- Inch-metric dials are standard
- Compound and cross slide have backlash elimination
- Adjustable gibs are incorporated in the carriage and slideways
- Tailstock may be offset for turning tapers and includes an inch metric graduated quill
- Features 6 in 3-jaw direct mount chuck with top reversing jaws, 8 in 4-jaw independent chuck, 12 in face plate, foot brake and coolant system with splash guard
- Features four-way tool post, steady and follow rest, micro-carriage bed stop, front removable chip tray and spindle jog button
- Features halogen work lamp and metric change gears
- 40 longitudinal/cross feed rates, 22 metric threads, 5/8 in x 5/8 in max tool size, 20 in swing through gap
- 14 in swing over bed, 0.45 - 7.5 metric threads, 3-3/4 in steady rest capacity, 40 number of inch threads, D1-4 spindle mount, 2-3/4 in follow rest capacity, 1-1/2 in spindle bore, 4 - 112 TPI, 14 in x 40 in size, 9-3/8 in length, 230 V prewired
Send
Print
