JET® Drill Press, Arm Radial, MT-5 Spindle Taper, 40 to 1920 rpm Spindle Speed, 12 Spindle Speed, 13-3/8 to 62-1/4 in Spindle to Column Distance, 27-7/8 x 19-5/8 x 15-3/4 in Table, 97-5/8 x 41-11/32 x 8-1/4 in Base, 17 in Column Dia, 7-1/2 hp, 460 VAC, 112 x 55 x 116 in

• Made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
• Spindle is made of the finest case hardened steel for extra strength and wear
• Supported by double row taper roller and thrust ball bearings at the nose with thrust and radial axis bearings at the top
• Spindle is built to withstand exceptionally heavy drilling and boring loads and to insure maximum accuracy
• Push button controls are all reduced to 110 V
• Electrical circuits are located in the built in control box at the rear of the arm- this keeps the controls dust and humidity free while making them easily accessible for maintenance
• Entire frame is made of meehanite and high tensile strength cast iron to handle the heaviest of jobs
• Arm raising safety device prevents arm from dropping
• Counter balanced mechanism for spindle return
• 12 speeds/3 feed rates make exotic materials easier to drill, bore and tap
• Centralized control center, automatic tool ejector, built in work light, coolant pump, tool kit and box table
• Independent arm manual clamping system, which locks and unlocks the head and column
• 13 in quill travel with powerfeed engaged
• 124-58/64 in machine height from floor
• 13-3/8 - 63 in distance base to spindle
• 2-3/8 in tapping capacity cast iron
• 5 in boring capacity steel
• 2-7/8 in drilling capacity cast iron
• 2 in tapping capacity mild steel
• 2-1/2 in drilling capacity mild steel , 33-15/32 in vertical arm travel, 6 IPR quill down feed rates, 1/8 in coolant pump motor, 7-3/8 in boring capacity cast iron, 44-7/8 in travel of head horizontal, 2 elevating motor, 9-7/8 in quill travel, 5 ft arm radia