JET® Drill Press, Arm Radial, MT-4 Spindle Taper, 44 to 1500 rpm Spindle Speed, 12 Spindle Speed, 13-3/4 to 46 in Spindle to Column Distance, 25 x 20-1/2 x 16-5/16 in Table, 67-3/4 x 28 x 7 in Base, 11-13/16 in Column Dia, 2-1/2 to 5 hp, 230 VAC, 80 x 39 x 89 in

• Made of the finest quality, heat treated and ground nickel-chrome steel, giving extra strength and smoothness to high torque loads
• Spindle is made of the finest case hardened steel for extra strength and wear
• Supported by double row taper roller and thrust ball bearings at the nose with thrust and radial axis bearings at the top
• Spindle is built to withstand exceptionally heavy drilling and boring loads and to insure maximum accuracy
• Push button controls are all reduced to 110 V
• Electrical circuits are located in the built in control box at the rear of the arm- this keeps the controls dust and humidity free while making them easily accessible for maintenance
• Entire frame is made of meehanite and high tensile strength cast iron to handle the heaviest of jobs
• Arm raising safety device prevents arm from dropping
• Counter balanced mechanism for spindle return
• 12 speeds/3 feed rates make exotic materials easier to drill, bore and tap
• Centralized control center, automatic tool ejector, built in work light, coolant pump, tool kit and box table
• Independent arm manual clamping system, which locks and unlocks the head and column
• 9-7/16 in quill travel with powerfeed engaged
• 109-1/2 in machine height from floor
• 19-3/8 - 54 in distance base to spindle
• 1-1/2 in tapping capacity cast iron
• 3-3/8 in boring capacity steel
• 2-5/16 in drilling capacity cast iron
• 1 in tapping capacity mild steel
• 1-7/8 in drilling capacity mild steel, 35 in vertical arm travel, 3 IPR quill down feed rates, 1/8 in coolant pump motor, 4-3/4 in boring capacity cast iron, 35 in travel of head horizontal, 1 elevating motor, 9-7/8 in quill travel, 4 ft arm radia