JET® Engine Lathe, Series: ZX Series, 14 in Swing Over Bed, 7-5/8 in Swing Over Cross Slide, 40 in Distance Between Centers, 13-3/8 in Bed Width, #4 Morse Taper Tailstock Taper, #7 Morse Taper (#5 Morse Taper) Spindle, 42 to 1800 rpm Spindle Speed, 12 Spindle Speed, 9 in Cross Travel, 5 in Tailstock Spindle Travel, 36-9/16 in Carriage Travel, 5-1/8 in Compound Travel, 0.0006 to 0.0365 in Maximum Cross Feed Rate per Revolution, 0.0015 to 0.0913 in Maximum Longitudinal Feed Rate per Revolution, 7.5 hp, 230/460 VAC, 96 x 44 x 66 in
| Bed Width |
: |
13-3/8 in |
| Carriage Travel |
: |
36-9/16 in |
| Compound Travel |
: |
5-1/8 in |
| Cross Travel |
: |
9 in |
| Dimensions |
: |
96 x 44 x 66 in |
| Maximum Cross Feed Rate per Revolution |
: |
0.0006 to 0.0365 in |
| Maximum Longitudinal Feed Rate per Revolution |
: |
0.0015 to 0.0913 in |
| Number of Spindle Speeds |
: |
12 |
| Series |
: |
ZX Series |
| Spindle Speed |
: |
42 to 1800 rpm |
| Tailstock Spindle Travel |
: |
5 in |
| Tailstock Taper Size |
: |
#4 Morse Taper |
| Voltage Rating |
: |
230/460 VAC |
| Swing Over Bed |
: |
14 in |
| Swing Over Cross Slide |
: |
7-5/8 in |
| Distance Between Centers |
: |
40 in |
| Spindle Size |
: |
#7 Morse Taper (#5 Morse Taper) |
| Horsepower |
: |
7.5 hp |
- 3-1/8 in bore spindle is supported by two tapered and one ball bearings
- Chrome molybdenum headstock gears are hardened, ground and shaved
- Universal gear box allows inch, metric, diametric and module pitch threads, no change gears required
- Carriage features one shot lubrication and turcite-B on bed sliding surfaces
- T-slotted compound slide featuring four-way tool post
- One piece cast iron base absorbs vibration allowing heavier cuts
- High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground
- Removable gap allows large diameter work
- Five position automatic carriage stop increases productivity
- Attractive chrome levers, dials and knobs complete this impressive package
- Provides power, precision, efficiency and reliability to your metal shop
- 10 in 3-jaw scroll chuck with top reversing jaws, 12 in 4-jaw independent chuck and 12 in face plate
- Features four-way tool post, follow rest, large capacity steady rest, full length splash guard and coolant return
- Fully integrated coolant system and meehanite castings
- Large easy to use foot brake, articulating halogen work lamp, centrally located controls with jog button
- Features threading dial, mounting pads/levelers and comes with tool box as well as adjusting tools
- 122 longitudinal/cross feed rates
- 24 metric threads
- 1 x 1 in max tool size
- 23-5/8 in swing through gap, 14 in swing over bed, 0.05 - 2 metric threads, 3/8 - 7 in steady rest capacity, 61 number of inch threads, D1-8 spindle mount, 1/2 - 3-1/2 in follow rest capacity, 3-1/8 in spindle bore, 1-5/8 - 72 TPI, 14 in x 40 in size, 12 in length
Send
Print
