Dynabrade® 11486
send Send print Print

Dynabrade® 11486

Dynabrade® Dynabelter® 11486 Heavy Duty Accu-Grinder, 1 in W x 30 in L, 1.2 hp, 58 scfm Air Flow, 90 psi

  • TIEPN: DYN 11486
  • MPN: 11486
  • Min. Order Qty: 1
  • Quantity Interval: 1
  • loading

Dynabrade® Dynabelter® Accu-Grinder, Heavy Duty, Tool/Kit: Bare Tool, 30 in Belt Length, 1 in Belt Width, 13000 rpm, 1.2 hp, 58 scfm, 90 psi Air, 3/8 in NPT Air Inlet, Front Exhaust Location, 1/2 in ID Minimum Hose Size, Right Angle, 89 dBA, 22 mm L x 7 mm H

Air Inlet      :      3/8 in NPT
Dimensions      :      22 mm L x 7 mm H
Exhaust Location      :      Front
Handle Type      :      Right Angle
Minimum Hose Size      :      1/2 in ID
Series      :      Dynacut Gold
Sound Level      :      89 dBA
Speed      :      13000 rpm
Type      :      Heavy Duty
Tool/Kit      :      Bare Tool
Belt Length      :      30 in
Belt Width      :      1 in
Horsepower      :      1.2 hp
Air Flow Rate      :      58 scfm
Air Pressure      :      90 psi
  • Grinds welds flat, without undercutting
  • Heavy Duty, 1.2 hp model efficiently removes excess weld material and leaves narrow 'in-line' scratch pattern
  • This model takes the guesswork out of weld grinding and prevents undercutting
  • Adjustable guide tires control the depth of abrasive belt cut
  • Allows controlled grinding on flats, contours and inside/outside of pipes and tanks
  • Simple twist-knobs adjust depth of cut
  • 12 in ID pipe or larger
  • 8 in OD pipe or larger
  • Takes the guesswork out of weld grinding and prevents undercutting
  • Simple twist knobs adjust depth of cut
  • 58 scfm maximum air flow at 90 psig pressure
  • 86 dB sound level