Rust-Oleum® DTM Acrylic Enamel Base, 1-Component Water Based, Series: 3700 System, 1 gal Container, Water, Tint Base, Acrylic Resin, Liquid Form, Light, 160 to 270 sq-ft/gal Coverage, Chemical Composition: Titanium Dioxide, Dipropylene Glycol Monobutyl Ether, Diethylene Glycol Monomethyl Ether, 1 to 2 hr Tack Free/2 to 4 hr Handle Drying, 35 to 100 deg F, <250 g/L VOC, Mild Odor/Scent
| Chemical Composition |
: |
Titanium Dioxide, Dipropylene Glycol Monobutyl Ether, Diethylene Glycol Monomethyl Ether |
| Coverage |
: |
160 to 270 sq-ft/gal |
| Drying Time |
: |
1 to 2 hr Tack Free/2 to 4 hr Handle |
| Form |
: |
Liquid |
| Odor/Scent |
: |
Mild |
| Series |
: |
3700 System |
| Temperature Rating |
: |
35 to 100 deg F |
| Type |
: |
1-Component Water Based |
| VOC Content |
: |
<250 g/L |
| Container Size |
: |
1 gal |
| Base Type |
: |
Water, Tint |
| Resin Type |
: |
Acrylic |
| Color |
: |
Light |
- Outperforms other brands in adhesion, gloss/color retention, and resistance to corrosion, mild chemicals and early-water
- Performs well in high humidity and cold conditions down to 35 deg F, resists weathering
- Direct-to-metal (DTM) coating, no primer required, excellent one coat coverage
- Two-year rust proof guarantee - maximum corrosion protection
- Polyamine epoxy resin
- 5 years shelf life
- 1.193 relative density
- >93 deg C flash point
- Self-priming
- For best results - apply when temperature are 35 to 100 deg F and relative humidity is less than 95%
- Meets USDA requirements for incidental food contact, accepted for use in federally registered Canadian food facilities
- 1 to 3 hrs recoat dry time
Send
Print
https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/Rust_Oleum_206164_Specification_Sheet.pdf
